• Front Speaker Size: 6.5”
  
• Rear Speaker Size: 6x9”
  
• Speaker Type: 2-way coaxial (PRO series front)
  
• Magnet Type (Front): Neodymium
  
• Amplifier Power Output: 800W total (SounDigital EVOX platform)
  
• Amplifier Channels: 4-channel
  
• DSP Channels: 8-channel
  
• Wiring Type: OFC (oxygen-free copper)
  
• Signal Input: High-level (via LOC to DSP)
  
• Integration Type: OEM head unit retained with DSP control
  
• Fitment Type (Front): Direct fit (no pod modification required)
  
• Weather Resistance: Yes (speaker design)
  

• High-output front speakers designed for stronger projection at highway speeds
  
• Full front and rear system for increased coverage and system scale
  
• DSP-controlled signal chain enables precise tuning and optimisation
  
• Direct-fit front speakers eliminate need for fairing modification
  
• Acoustic treatment improves clarity and reduces resonance at higher output

• Street Glide models (2014–2023)
  
• Street Glide Special models (2014–2023)
  
• Ultra Limited models (2014–2023)
  
• Ultra Classic models (2014–2023)
  
• Electra Glide Standard models (2019–2023)
  
• Road Glide models (2015–2023)
  
• Road Glide Special models (2015–2023)
  
• Road Glide Ultra models (2016–2023)
  
• Road Glide Limited models (2020–2023)
  

Notes:

• Designed for Harley Davidson Touring platform with front fairing speaker locations
  
• Assumes OEM head unit and factory speaker output integration
  
• Saddlebag lid fitment applies to Rushmore Touring models (2014–2023.5)
  
• Compatibility may vary depending on fairing configuration and OEM system version

• Riders running louder exhaust systems requiring maximum front-stage projection
  
• Touring bikes used for highway riding where output and presence are critical
  
• Users wanting a fully tuned front and rear DSP-based system
  
• Installers or experienced DIY users building a high-performance Harley audio setup

This is the highest-output configuration in the OSCA Harley range, designed for bikes where standard upgrades simply aren’t enough. The PRO-series speakers deliver stronger projection and maintain composure at higher volume, while the addition of rear 6x9s and DSP transforms the system into a properly controlled, full-range setup.

Like all OSCA Harley kits, it’s engineered as a complete system rather than a collection of parts, with a focus on signal management, component integration, and real-world performance. The result is a system that delivers consistent output, clarity, and control once installed, backed by hands-on experience rather than generic retail logic.

• Direct-fit front speakers — no modification to factory speaker pods required
  
• Saddlebag lids must be replaced with included 6x9 adapter lids
  
• OEM head unit retained but requires signal integration via LOC and DSP
  
• DSP setup and tuning is required for correct system performance
  
• Harley ECU flash tune required to correct factory EQ curve and increase signal voltage before DSP tuning
  
• Dual wiring kits required to support amplifier current demands
  
• Amplifier and DSP mounting solutions required depending on bike model
  
• Acoustic treatment should be applied to fairing, speaker pods, and saddlebag lids
  
• Proper gain structure is critical to maintain clarity at higher output levels
  
• Professional installation and DSP tuning strongly recommended